AJA FS1 Version 2.2.0.47 User Manual

Page 90

Video In (2.1)

NTSC Standard (3.4)

Audio In (2.2)

Frame Rate (3.3)

Component In (3.1)

Component Out (3.2) Signal Type

Analog Audio Standard (4.1)

SDI 1 (default)

SDI 2

Composite

S-Video

Component

Select

SDI 1 connector as the input source.

Select

SDI 2 connector as the input source.

Select the

Composite connector as the input source.

Select the

S-Video connector as the input source.

Select the

Component connector as the input source.

NTSC (default)

NTSC Japan

Select

NTSC for US NTSC standard.

Select

NTSC Japan for the Japanese NTSC standard.

Embed Auto

(Follows Video Input select)

Embed SDI 1
Embed SDI 2

AES unbal (default)

Analog

Use the embedded audio from the currently selected Video Input (SDI 1 or 2) as the input

source. (This defaults to SDI 1 if Video In is not SDI.)

Use the embedded audio from the

SDI 1 connector as the input source.

Use the embedded audio from the

SDI 2 connector as the input source.

Select thedigital

AES/EBU Audio connectors (8-ch) as the audio input source.

Select the

Analog Audio connector (DB25, 8-ch) as the audio input source.

59.94/23.98 (default)

60/24
50/25

Select the

59.94/23.98 item if your desired rate is either 59.94 or 23.98.

Select the

60/24 item if your desired rate is either 60 or 24.

Select the

50/25 item if your desired rate is either 50 or 25 (PAL).

Beta YPbPr

SMPTE YPbPr (default)

Configure the

Component video input source as Beta YPbPr (standard definition). If the

selected

Component video source is HD, this will default to SMPTE YPbPr.

Configure the

Component video input source as SMPTE YPbPr.

Beta YPbPr

SMPTE YPbPr (default)

RGB

Configure the

Component video output as Beta YPbPr (standard definition). If the

Component video is HD, this will default to SMPTE YPbPr.
Configure the

Component video output as SMPTE YPbPr.

Configure the

Component video output as RGB.

+24 dBu (default)

+18 dBu
+15 dBu
+12 dBu

Select +24 dBu as the analog audio level.
Select +18 dBu as the analog audio level.
Select +15 dBu as the analog audio level.
Select +12 dBu as the analog audio level.

Maximum amplitude (0 dBFS)