Rockwell Automation Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Quick Start - Manual (Page 10)

10 Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012
Preface
How Hardware is Connected
This quick start demonstrates the following Logix5000 control system using POINT I/O
modules on a DeviceNet network.
Required Software
To complete examples in this quick start, you need this software.
Software Required Software Version, Min. Required for this Task
RSLogix 5000
20.00.00 or later
(1)
(1) RSLogix 5000 software, version 20.00.00 or later is required for use of this quick start because the example Logix5000 controller, and associated tasks, described herein are completed in a
CompactLogix 5370 L3 control system. CompactLogix 5370 control systems require RSLogix 5000 software, version 20.00.00 or later. If you connect a 1734 POINT I/O module over a DeviceNet network in a
Logix5000 control system that uses a different controller, the minimum software version may differ.
Change RSLogix 5000 projects to use
POINT I/O modules.
RSNetWorx

for DeviceNet
11.00.00 Modify DeviceNet configuration file to
include the POINT I/O modules described in
this publication.
DeviceNet Tag Generator 20.00.00 or later Generate new programs and tags in your
RSLogix 5000 project.
24VDC Source Output
Module Status Network Status
1734 OB4E
NODE:
0 1
2
3
Adapter Status
System Power
DeviceNet Status
PointBus Status
Field Power
1734-ADN
Logix5000
Controller with
DeviceNet
Scanner Module
Computer Connected to
Logix5000 Controller
POINT I/O Modules
DeviceNet Power Supply
1606-XLDNET8