Accessories, Motor cables, Connector kits – Rockwell Automation TLY-Series Servo Motor User Manual
Page 23: Shaft seal kits, Transition cables, Accessories 23
TL-Series Servo Motors 23
Publication TL-IN003A-EN-P — June 2007
Accessories
Accessories available from the factory include the following items.
Motor Cables
Factory manufactured feedback and power cables are available in standard cable lengths. Transition
cables are available to allow connection of servo motors with TLY catalog numbers to existing
N-Series power, feedback, and brake cables. Factory cables provide proper shield termination, which
reduces the potential for EMI.
For a complete listing of available cables refer to your drive’s installation manual, contact your nearest
Rockwell Automation sales office, or access the information from the website references in
Additional Resources on page 24.
Connector Kits
Each connector kit includes the appropriate connector housing, pins, and backshell.
Shaft Seal Kits
Catalog numbers and dimensions for shaft seals are shown below.
Transition Cables
Transition cables interface between N-Series motor cables and the cables on servo motors with TLY
catalog numbers with incremental encoders. The cables are 500 mm (20.0 in.)in length.
Connector Kit
Catalog Number
Connector Kit
Catalog Number
Feedback Connector
2090-KFBM6-00AA
Power Connector
2090-KPBM6-16AA
Motor
Catalog
Number
(1)
(1)
Shaft seals require a lubricant to reduce wear. Lubricant is provided with kit.
Inside Diameter
Outside Diameter
Width
mm (in.)
mm
(in.)
mm
(in.)
TLY-A110, TLY-A120, TLY-A130
TL-SSN-1
8.9
(0.35)
16
(0.71)
3
(0.12)
TLY-A220, TLY-A230
TL-SSN-2
14.0
(0.55)
24
(0.95)
5
(0.20)
TLY-A2530, TLY-A2540, TLY-A310
TL-SSN-3
19.8
(0.78)
30
(1.18)
5
(0.20)
Feedback Cable
Catalog Number
Power and Brake Cable
Catalog Number
Power Only Cable
Catalog Number
2090-CFBM6CN-04AA 2090-CPBM6CN-16AA 2090-CPWM6CN-16AA