Rockwell Automation 1758 DataSite Accelerator Toolkit - Manual (Page 90)

90 Publication IASIMP-QS008A-EN-P - March 2009
Appendix A DataSite to FactoryTalk View ME Master
6. Wait for the application to the
load and verify that
DataSite_ME_Modbus_Serial.
mer appears under Current
application.
7. Press Run Application [F2].
The application builds and displays
a DataSite screen on the PanelView
Plus terminal.
8. Press Process Variables &
Compressibility.
Verify the process variables match
the numbers simulated using DS
FloConfig:
– Static Pressure = 800
– Temperature = 80
– Differential Pressure = 70
9. Return to the main screen and press the other two blue buttons to view accumulated flow
data.
The flow data displayed is for Meter Run 0 (MR0). You can easily add other meter runs by adding
the corresponding Modbus registers in the KEPServerEnterprise (.pfe) file. You must then
duplicate the ME screens and change the tag names to match their corresponding tag name.
Configuration and validation of the DataSite to ME Master configuration is now complete.
IMPORTANT
If the PanelView Plus terminal displays asterisks instead of data, then you need to select a different COM
port for the Serial DF1 driver. Skip to page
91 for instructions on how to change the COM port.
2800
800