Rockwell Automation 61C23 AutoMate Local I/O Head - Manual (Page 7)

1Ć1
1.0 INTRODUCTION
The products described in this instruction manual are manufactured
or distributed by Reliance Electric Industrial Company.
The Local I/O Head increases the number of RAIL ports available for
connecting Rails and RailĆcompatible devices such as LED and TWS
modules to AutoMate and DCS 5000/AutoMax systems. One
AutoMate Local I/O Head allows you to connect up to 64 points of
digital I/O, 16 points of analog I/O, or a combination of the two, to
each of the four RAIL ports on the models listed below. Note that the
various AutoMate Processor models will support different amounts of
total system I/O.
D AutoMate 20 Processor
D AutoMate 30 Processor
D AutoMate 40 Processor (M/N 45C400 or M/N 45C409)
D AutoMate Local I/O Processor M/N 45C200
D AutoMate Remote I/O Head M/N 45C37, 45C38
D DCS 5000/AutoMax Remote I/O Head M/N 45C33/57C330 *
* The Analog Rail modules (e.g., M/N 61C350, 61C351) cannot be
used with the Local I/O Head in this configuration.
This remainder of this manual describes the functions and
specifications of the Local I/O Head. It also includes an overview of
installation and servicing procedures.
1.1 Additional Information
You should be familiar with the instruction manuals which describe
your system configuration. This may include, but is not limited to, the
following:
D JĆ3012 AutoMate Digital I/O Rail and Modules
Instruction Manual
D JĆ3031 AutoMate 30 Processor Hardware Instruction Manual
D JĆ3033 AutoMate Local I/O Processor Instruction Manual
D JĆ3037 AutoMate Remote I/O Head Instruction Manual
D JĆ3063 AutoMate Programming Executive Instruction Manual
D JĆ3120 AutoMate 20 User's Manual
D JĆ3140 AutoMate 40 Logic Processor Instruction Manual
D JĆ3150 AutoMate 30/40 Software Instruction Manual
D JĆ3630 ReSource AutoMax Programming Executive
Instruction Manual
D JĆ3649 DCS 5000/AutoMax Configuration Task Instruction
Manual
D JĆ3684 ReSource AutoMax Programming Executive Instruction
Manual Version 2.0
D JĆ3750 ReSource AutoMax Programming Executive Instruction
Manual Version 3.0