Rockwell Automation 2711P ControlNet Communications for PanelView Plus and PanelView Plus CE - Manual (Page 49)

Publication 2711P-UM003B-EN-P - March 2007
Configure Scheduled Communications 49
Identify Where the Output Data is Going
Identify where the raw output data is going by creating an Alias to
allow RSView Machine Edition to use this data.
1. Right-click on 0-3 Bytes under Output and select Add Alias.
2. In the Alias Properties Dialog, select the Alias Data Type DINT,
set these properties, and click OK.
a. Alias Name = Output
b. Start Byte = 0
c. Array Count = 1
The PanelView will send these 4 bytes as a DINT to the
ControlLogix processor.