Rockwell Automation 2500 SecureConnect Units for CENTERLINE 2500 Low Voltage Motor Control Centers - Manual (Page 11)

Rockwell Automation Publication 2500-IN005B-EN-P - April 2012 11
SecureConnect Units for CENTERLINE 2500 Low Voltage Motor Control Centers
8. Move the flange handle from the Disconnected to the Test position.
a. Press and hold the black button on the front of the door.
b. Start moving the handle to the left while releasing the black button.
c. Move handle until it clicks into the Test position.
9. Move the flange handle from the Test to the Connected position.
a. Press and hold the black button on the front of the door.
b. Start moving the handle to the left while releasing black button.
c. Move handle until it clicks into the Connected position.
IMPORTANT Listen for the handle to click into place. Then, verify that the handle is locked
into place by trying to move the handle back and forth.
IMPORTANT Listen for the handle to click into place. Then, verify that the handle is locked
into place by trying to move the handle back and forth.

• Control and Network connections: ON
• Line and Load Power: OFF
Test
Turn Off
Circuit Breaker
Press
Black Button
Move Handle

Flange Handle in
the Test Position
Black Button
Flange Handle in the
Connected Position
• Control and Network connections: ON
• Line and Load Power: ON
Connected

Turn Off
Circuit Breaker
Press
Black Button
Move Handle

Black Button