Rockwell Automation 1799-D10U10BL 10 Input/10 Output Discrete Embedded I/O - Manual (Page 15)

10 Input/10 Output Discrete Embedded I/O Boards 15
Publication 1799-IN003B-EN-P - December 2000
Technical Support
For additional troubleshooting information on the 1799 Embedded I/O
Boards, access Rockwell Automation’s technical support services at
440.646.5800 or on the Web at http://www.ab.com.
Specifications
10 Input/10 Output Board - Cat. No. 1799-D10U10B, -D10U10BL, -D10U10V & -D10U10VL
Input Specification Max Min
Inputs per block 10 Sinking or Sourcing, Type 1 + compatible
Off-State
Voltage
Current 5V dc
1.5 mA -
-
On-State
Voltage
Current 30V dc
6 mA 10V dc
2 mA
Output Specification
Outputs per block 10 Sinking or Sourcing, 0.5A, Short Circuit Protected,
Pilot Duty
Output Auxiliary Voltage 30V 10V
On-State Voltage Drop 250 mV -
On-State Current 0.5A -
Off-State Leakage 20 µΑ -
Board Current (all outputs on) 4.0A -
Surge Current - for 10ms, repeatable
every 2s (individual outputs) 1.0A
General Specifications
DeviceNet Power
Voltage
Current 25V dc
125 mA 11V dc
-
DeviceNet Power
Circuit Type
Class 2
Auxiliary Power
Voltage
Current 30V dc
4.0A (all outputs on) 10V dc
100 mA (all outputs off)
LED Indicators Board Status - red/green
Network Status - red/green
Auxiliary Power - green
Logic Status - green
Input Point LED - yellow
Output Point LED -yellow