Rockwell Automation 1395 Digital DC Drive User Manual
Page 55
Publication 2361-5.01 July 1998
Chapter
5
Installing Your Drive
Contents
This chapter will guide you in the installation of your new drive. The
following topics will be covered:
Resources
&
To properly install and configure your drive, you will need the
following publications:
Plus, you may need to refer to your system schematics, motor/
encoder documentation, and other documentation listed in the preface
of this manual (for adapter boards and NEC standards).
Topic
Page
Resources
5-2
Physically Installing the Unit at Your Site
5-2
Preparing AC Input Entry
5-2
Installing and Configuring Your Drive
5-4
Publication Title
2300-5.1
Bulletin 2300 Family of Drive Systems Hardware–Installation Manual
2100-5.5
Receiving, Handling, and Storing Motor Control Centers–Instructions
1395-5.40
1395 Digital DC Drive–User Manual
!
ATTENTION: Electric shock or equipment damage
may occur if the drive is not installed properly. Comply
to the provisions listed in the National Electric Code
(NEC) and in your local codes to safely install your
drive.
Physically
Installing the
Drive at Your
Site
(This Manual)
Preparing AC
Input Entry
(This Manual)
Top Hat
Assembly
Instructions
(included with
top hat
assembly)
Receiving,
Handling, and
Storing Motor
Control
Centers–
Instructions
(2100-5.5)
Bulletin 2300
Family of Drive
Systems
Hardware–
Installation
Manual
(2300-5.1)
Installation
(1395-5.40)
References
Reference
Installing and
Configuring
Your Drive
(This Manual)
NFPA 70,
Local Codes,
Misc.
Reference
Manuals
References