Rockwell Automation 2711P-Rxxxx Logic Module, Internal CompactFlash, and RAM - Manual (Page 6)

6 Logic Module, Internal CompactFlash, and RAM
Publication 2711P-IN004J-EN-P - September 2009
Component Compatibility for PanelView Plus Terminals
It is important that you match the series of the internal CompactFlash card with the correct
series of the logic module and software version. The series of the CompactFlash determines
the version of FactoryTalk View ME software. The logic module is available with or without
memory installed.
Compatibility After Upgrade
FactoryTalk View ME terminals are compatible with .MER applications that are the same or a
previous revision. For example, FactoryTalk View ME 3.20 terminals can run .MER
applications for FactoryTalk View ME software, versions 3.0, 3.10, and 3.20.
For PanelView Plus CE devices, the appropriate changes are made to the OS, from Windows
CE software, version 3.0 to 4.1, when upgrading from FactoryTalk View ME software,
version 3.0 to 3.10 or later.
Logic Module Compatibility
2711P-RPx, 2711P-RP1x,
2711P-RP2x, 2711P-RP3x
Internal CompactFlash
2711P-RW1, 2711P-RW2,
2711P-RW3
FactoryTalk View ME
Software Version
Series A: 2711P-RPx/A (1)
(1) Series A logic modules are compatible with series B CompactFlash cards. When upgrading from FactoryTalk View ME
software, version 3.0 to 3.10 or later, the Firmware Upgrade Kit is required.
Series B: 2711P-RWx/B FactoryTalk View ME 3.0
Series B: 2711P-RPx/B Series C: 2711P-RWx/C FactoryTalk View ME 3.10
Series B: 2711P-RPx/B
Series C: 2711P-RPx/C
Series D: 2711P-RPx/D
Series E: 2711P-RPxx/E
Series F: 2711P-RPxx/F (2)
Series G: 2711P-RPxxx/G (2)
(2) Series F and later logic modules work with PanelView Plus and PanelView Plus CE CompactFlash cards.
Series D: 2711P-RWx/D
Series E: 2711P-RWx/E
FactoryTalk View ME 3.20
Series F: 2711P-RWx/F
Series G: 2711P-RWx/G
Series H: 2711P-RWx/H
FactoryTalk View ME 4.0
Series J: 2711P-RWx/J FactoryTalk View ME 5.0 or 5.1