Rockwell Automation 2711P-Rxxxx Logic Module, Internal CompactFlash, and RAM - Manual

Installation Instructions
Logic Module, Internal CompactFlash, and RAM
Catalog Numbers 2711P-Rxxxx
About the Components
This document provides information on how to install these components:
•
Logic module on a PanelView Plus or PanelView Plus CE device
•
Memory (RAM and internal CompactFlash) in the logic module
For complete information on installing, wiring, and troubleshooting the terminals, refer to the
publications listed under
Additional Resources .
This document refers to FactoryTalk View ME software that was previously named RSView
ME software.
Topic Page
About the Components 1
Important User Information 2
Safety Precautions 3
About the Logic Module 3
Electrostatic discharge (ESD) wristband 5
Install or Replace RAM 7
Install or Replace the Internal CompactFlash 8
Marine Applications 11
Install a Logic Module 12
Replace a Logic Module 13
Additional Resources 14