Rockwell Automation 2094-BSP2 Kinetix 6000 Shunt Module Installation Instructions - Manual

Installation Instructions
Kinetix 6000 Shunt Module
Catalog Number 2094-BSP2
About the Kinetix 6000 Shunt Module
The Bulletin 2094 shunt module provides 200 W shunting capacity for applications
where the internal Kinetix 6000 integrated axis (IAM) module or axis (AM) module
shunt capacity is exceeded. The Kinetix 6000 shunt module is compatible with all
230V and 460V Kinetix 6000 drive systems and mounts on the Bulletin 2094 power
rail.
Refer to the Kinetix 6000 Multi-axis Servo Drive User Manual, publication
2094-UM001 , for detailed information on wiring, applying power, troubleshooting,
and integration with ControlLogix, CompactLogix, or SoftLogix controller platforms.
Topic Page
About the Kinetix 6000 Shunt Module 1
Important User Information 2
Before You Begin 3
Install the Kinetix 6000 Shunt Module 3
Connector Data 7
Power Wiring Requirements 8
Additional Resources 9
IMPORTANT
Use the 2094-BSP2 shunt module in any single Kinetix 6000 power rail system
and in common-bus applications where the IAM module is the common-bus
leader drive. You cannot use the 2094-BSP2 shunt module in common-bus
applications where the IAM module is the common-bus follower drive.
You cannot mount more than one 2094-BSP2 shunt module on the power rail.