Rockwell Automation 1799ER-IQ10XOQ10 Dual-Port EtherNet Embedded I/O Board with 10 Inputs/ Outputs User Manual

Page 7

Text mode
Original mode

Dual-Port EtherNet Embedded I/O Board with 10 Inputs/ 10 Outputs 7

Publication 1799ER-IN001B-EN-P - May 2013

3. Place the screws through the cover into the stand-offs and tighten them.

You can also mount the board in an enclosure with pre-tapped holes, which accommodate
M3 x 0.5 mm screws.

IMPORTANT

With the addition of the cover, the height of the board increases from
89.9 mm to 93.73 mm (7.40 in. to 3.69 in.) and the depth, including
stand-offs, increases from 20 mm to 37 mm (0.79 in. to 1.46 in.).

ATTENTION: To comply with the CE Low Voltage Directive (LVD), this
equipment and all connected I/O must be powered from a source compliant
with the following:

Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV).

44996

DIN Rail Bracket

Plastic Cover

93.73 mm

(3.69 in.)

DIN Rail

Mounting Plate

15.62 mm
(0.62 in.)

Stand-off