Rockwell Automation 2364P Parallel DC Bus Supply Config. - Manual (Page 7)

Preface
Preface
Who Should Use This Manual This manual is intended for those who are responsible for installing or
operating an Allen-Bradley parallel DC bus supply configuration.
If you do not have a basic understanding of this product, please read
through this manual. Contact your local Rockwell Automation Drive
Systems representative if you have questions about the content of this
manual or the product.
Purpose of This Manual This manual contains specifications, installation instructions, and
operating instructions for the 2364P parallel configuration.
Safety Precautions The following general precautions apply when installing, servicing,
or operating parallel configurations and drive system lineups:
!
ATTENTION: Only those familiar with the drive
system, the products used in the system, and the
associated machinery should plan or implement the
installation, startup, and future maintenance of the
system. Failure to comply can result in personal injury
and/or equipment damage.
ATTENTION: Verify that all sources of AC and DC
power are deenergized and locked out or tagged out in
accordance with the requirements of ANSI/NFPA 70E,
Part II.
ATTENTION: The system may contain stored energy
devices. To avoid the hazard of electrical shock, verify
that all voltage on capacitors has been discharged before
attempting to service, repair, or remove a drive system
or its components. You should only attempt the
procedures in this manual if you are qualified to do so
and are familiar with solid-state control equipment and
the safety procedures in ANSI/NFPA 70E.