Rockwell Automation 1799-D16U16BAGL 16 Input/16 Output Digital and 2 Input/2Output Analog - Manual (Page 27)

16 Input/16 Output Digital and 2 Input/2 Output Analog Embedded I/O Boards 27
Publication 1799-IN011A-EN-P - February 2007
Network Status Indicator (Labeled NS)
DeviceLogix Status Indicator (Labeled DL)
I/O State Indicators (Labeled Inputs and Outputs)
Analog Input Indicators
Analog Output Indicators
Indication Status
None Not on-line
Green Blinking Green On-line/no connections
Solid Green On-line/connected
Red Blinking Red Connection timed out
Solid Red Failed communication: a duplicate node address exists or
module is at the wrong communication rate
Indication Status
None Logic disabled
Green Solid Green Logic enabled
Blinking Green Local forces applied and local logic enabled
Color Indication Status
None Input or output point off
Yellow Solid Yellow Input or output point on
Color Indication Status
None No power or calibration started
Green Blinking Green Calibration in process
Solid Green Normal operation
Red Blinking Red Open wire or out of range
Solid Red No AD communications
Color Indication Status
None No power or calibration started
Green Blinking Green Calibration in progress
Solid Green Normal operation
Red Blinking Red Open wire or out of range