Rockwell Automation 2711C-xxxx PanelView Component HMI Terminals Installation Instructions - Manual (Page 28)

28 PanelView Component HMI Terminals
Publication 2711C-IN001H-EN-P - July 2014
WARNING: To avoid the danger of explosion, only replace the battery with 2711P-RY2032 or a
manufacturer’s equivalent such as the Matsushita or Duracell DL2032.
For safety information on the handling of lithium batteries, see the Guidelines for Handling
Lithium Batteries, publication
AG 5-4 .
Do not dispose of battery in a fire or incinerator. Dispose of used batteries in accordance with
local regulations.
WARNING: When you connect or disconnect the battery an electrical arc can occur. This could
cause an explosion in hazardous location installations. Be sure that the area is nonhazardous
before proceeding.
For Safety information on the handling of lithium batteries, including handling and disposal of
leaking batteries, see Guidelines for Handling Lithium Batteries, publication
AG 5-4 .
At the end of its life, the used battery should be collected separately from any unsorted
municipal waste and recycled.