Rockwell Automation 2711P-RAT12E2 Adapter Kit for PanelView 1200/1200E Touch Screen Terminal Cutout - Manual

Publication 2711P-IN014D-EN-P - July 2007
Installation Instructions
Adapter Kit for PanelView 1200/1200e Touch
Screen Terminal Cutout
Catalog Numbers 2711-NR5T, 2711P-RAT12E2
About This Publication
This publication shows how to use the cutout adapter kit to mount the following
terminals into an existing PanelView 1200/1200e touch screen terminal cutout.
•
PanelView 1000/1000e touch screen
•
PanelView Plus 1250 touch screen
•
PanelView Plus CE 1250 touch screen
•
RAC6182 12.1 in. touch screen
Topic Page
About This Publication 1
Important User Information 2
About the Cutout Adapter Plate 3
Parts List 3
Required Tools 4
Disconnect Power to the Terminal 4
Remove the Existing Terminal from the Panel 4
Attach the Cutout Adapter Plate to the Panel 5
Mount the New Terminal in the Cutout Adapter Plate 6
Additional Resources 7