Rockwell Automation 1790-TXXXX CompactBlock LDX I/O Profibus Analog, RTD and Thermocouple User Manual
Installation instructions, What this document describes
1PRE
Publication 1790-IN010B-EN-P - April 2003
Installation Instructions
PROFIBUS DP Analog, RTD and
Thermocouple Base Terminal Block
CompactBlock LDX I/O
(Cat. Nos. 1790P-TN4C0, -TN0C2, -T4R0, -T4T0)
What This Document Describes
This document describes how to install your PROFIBUS DP
CompactBlock LDX I/O.
GSD File Requirements
Current functionality of PROFIBUS DP CompactBlock LDX I/O
blocks requires GSD files.
These files are easy to install and are available online at:
www.ab.com/networks/gsd/
For information on:
Refer to page:
GSD File Requirements
below
Important User Information
2
Installing CompactBlock LDX I/O
5
Wiring the Terminal Blocks
9
Connecting Field Wiring
10
Wiring the PROFIBUS Connector
15
I/O Memory Mapping
17
Troubleshooting
20
Specifications
22
Table of contents
Document Outline
- PROFIBUS DP Analog, RTD and Thermocouple Base Terminal Block CompactBlock LDX I/O (Cat. Nos. 1790...
- GSD File Requirements
- Important User Information
- Installing CompactBlock LDX I/O
- Set the Station Address on the Base Block
- Mount the Base Block
- Mount the Optional Expansion Blocks
- Wire the Terminal Block
- Connect Field Wiring
- Connect the PROFIBUS DP Terminal Connector
- Connect Power to the Block
- I/O Memory Mapping
- Troubleshoot with the Indicators
- PROFIBUS DP Digital Base Terminal Block Specifications The following table contains specification...
- Back Cover