Rockwell Automation 1771-OBN DC (10-30V) Output Module Installation Instructions - Manual (Page 4)

DC (10-30V) Output Module 4
Publication 1771ĆIN034B-EN-P - August 2002
!
ATTENTION
Preventing Electrostatic Discharge
This equipment is sensitive to electrostatic
discharge, which can cause internal damage and
affect normal operation. Follow these guidelines
when you handle this equipment:
•
Touch a grounded object to discharge potential
static.
•
Wear an approved grounding wriststrap.
•
Do not touch connectors or pins on component
boards.
•
Do not touch circuit components inside the
equipment.
•
If available, use a static–safe workstation.
•
When not in use, keep modules in appropriate
static–safe packaging.
The 1771-OBN/B dc output module is a source output and requires a
sink input. A sink input provides a path to ground and a source
output provides a positive voltage path.
Use this module in all 1771 I/O chassis except 1771-A1, -A2 and
1771-A4 chassis. Refer to the table below for processor
compatibility.
Processor Compatibility Chart
System Type Use with Processors:
Local MiniĆPLCĆ2/02
®
(cat. no. 1772ĆLZ, ĆLZP)
MiniĆPLCĆ2/16 (cat. no. 1772ĆLX, ĆLXP)
MiniĆPLCĆ2/17 (cat. no. 1772ĆLW, ĆLWP)
PLCĆ5/15
®
, Series B and later (cat. no. 1785ĆLT)
Remote (with a 1771ĆASB
remote I/O adapter)
PLCĆ2/20
®
(cat. no. 1772ĆLP2)
PLCĆ2/30 (cat. no. 1772ĆLP3)
PLCĆ3
®
(cat. no. 1775ĆL1, ĆL2, ĆL3, ĆL4)
PLCĆ3/10 (cat. no. 1775ĆLP4, ĆLP8)
PLCĆ5/15, Series B and later (cat. no. 1785ĆLT)
Do not place this module in the same I/O chassis as the 1771-IX
thermocouple module. You can use this module in the same chassis
as the 1771-IXE thermocouple module.
Preinstallation
Considerations