Rockwell Automation 1756-CNB ControlLogix ControlNet Bridge Module Installation Instructions User Manual
Controllogix controlnet bridge, Installation instructions, Catalog numbers 1756-cnb, -cnbr) series c and d
Publication 1756-IN571B-EN-P - April 2001
Installation Instructions
ControlLogix ControlNet Bridge
(Catalog Numbers 1756-CNB, -CNBR)
Series C and D
Use this document as a guide to install the ControlLogix
ControlNet Bridge module.
For Information About
See page
Understanding Compliance to European Union Directive
Preventing Electrostatic Discharge
Understanding Standalone and Redundant Control
Prepare the Chassis for Module Installation
Set the Module’s Network Address Switches
Prepare the Chassis for Module Installation
Prepare the Chassis for Module Installation
Connecting to the Network Using a Tap
Connecting a Programming Terminal to the Network Using 1786-CP Cable
Module Status Indicator and Display
ControlNet Channel Status Indicators
This manual is related to the following products:
Table of contents
Document Outline
- ControlLogix ControlNet Bridge
- Important User Information
- Understanding Compliance to European Union Directive
- Preventing Electrostatic Discharge
- Understanding Standalone and Redundant Control
- Prepare to Install the Module
- Identify Module Features
- Set the Module’s Network Address Switches
- Prepare the Chassis for Module Installation
- Determine Module Slot Location
- Installing or Removing the Module Under Power
- Connect the Module to the Network
- Troubleshooting
- Hazardous Location information
- Module Specifications