beautypg.com

Install the module – Rockwell Automation 1792D-2BV0D ArmorBlock MaXum 2 Input Module Series B User Manual

Page 4

background image

4 ArmorBlock MaXum 2 Input Module Series B

Publication 1792D-IN019B-EN-P - September 2000

Refer to the illustration of the node address below.

The module is equipped with AutoBaud detect. AutoBaud lets the
module read the settings already in use on your DeviceNet network
and automatically adjusts to follow those settings.

Install the Module

This module mounts to the following cable bases:

• 1792D-CBFM for KwikLink™ flat media installation

• 1792D-CB12 for 12mm drop cable installation

• 1792D-CB18 for round media DeviceNet

• or other optional cable base assembly

IMPORTANT

The cable base should already be installed. See
publication 1792D-IN009B-EN-P for information on
installing the cable base.

30703-M

Example: Node Address is set at 62, see small black dots.