Rockwell Automation 1792D-2BV0D ArmorBlock MaXum 2 Input Module Series B - Manual (Page 10)

10 ArmorBlock MaXum 2 Input Module Series B
Publication 1792D-IN019B-EN-P - September 2000
The following table describes network and module status indicators.
The following table describes logic status indicators.
The following table describes I/O status indicators.
For more information on indications see the Technical Data
publication 1792-TD001B-EN-P.
Net/Mod Status Indicator
Indication Status:
Off No power or auto bauding
Flashing Green/Off On line but not connected
Solid Green On line, link OK, connected
Flashing Red Recoverable fault - module configuration error
I/O connection fault - one or more I/O connections in the timed-out
state
Solid Red Unrecoverable fault
Communication failure - duplicate node address present or incorrect
baud rate
Green to Red to Off At powerup only - LED test
Logic Status Indicators
State Status
Off Logic is disabled
Solid Green Logic is enabled
Flashing Green Local forces are applied and local logic is enabled
I/O Status Indicators
Function Module Status Indicator
Point Indicator
1 Condition
Inputs Green
Green
Module Status blink red
Module Status blink red None
Yellow
Red
Blink red No valid input
Valid input
short on input connection
Off-wire on input connection