Rockwell Automation 1792-IB16LP INSTL INSTR 16 INPUT MODULE - Manual

ArmorBlock is a trademark of Allen-Bradley Co. Inc. Publication 1792-5.6 – September 1997
ArmorBlockĆLP 16 Input Module
Cat. No. 1792-IB16LP
This 1792 ArmorBlock

I/O block module (Cat. No. 1792-IB16LP )
contains I/O circuits, a built-in power supply, and a built-in DeviceNet
I/O adapter. Because of its sealed housing, this 1792 I/O block requires
no enclosure. It is compatible with PLC or SLC programmable
controllers using DeviceNet scanners. The I/O values are accessible
from the PLC or SLC programmable controller data table.
This ArmorBlock-LP module has no switches to set. You set module
parameters using the DeviceNet Manager Software (cat. no. 1787-MGR)
or similar configuration tool.
Contents
This box contains:
•
1 ArmorBlock–LP module
•
Package containing 10 write-on indicator tabs, and 7 micro caps
•
1 DeviceNet right hand aluminum T-port tap (part number 97042401)
•
Installation Instructions
European Union Directive Compliance
If this product is installed within the European Union or EEA regions
and has the CE mark, the following regulations apply.
EMC Directive
This apparatus is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC).
The product described in this manual is intended for use in an industrial
environment.
Installation Instructions