Rockwell Automation 1792D-8BT8LP ArmorBlock LP2 8 Sinking Input/8 Output Modul - Manual (Page 5)

ArmorBlock LP2 8 Sinking Input/ 8 Output Module 5
Publication 1792D-5.42 - July 1999
I/O connectors for this module are shown below.
!
$77(17,21
• Make sure to connect the proper color coded cables
together. DeviceNet cables should connect with
DeviceNet cables and auxiliary outputs should match
auxiliary outputs.
• Make sure all connectors and caps are securely tightened
to properly seal the connections against leaks and
maintain IP67 requirements.
• For maximum noise immunity, input and output cable
return wires must be properly terminated. When inputs
and outputs are connected in loopback, return wires
should be connected together.
• I/O cable length should be less than 30 meters.
I-4
I-5
I-6
I-7
O-4
O-5
I-2
I-3
O-2
O-3
O-6
O-7
Network Status Module Status
I-0
I-1
O-0
O-1
Auxiliary Power
Connector A
Connector B
Connector C
Connector D
Input 0
Input 1
Input 2
Input 3
Input 6
Input 7
Input 4
Input 5
Output 2
Output 3
Output 4
Output 5
Output 6
Output 7
Output 0
Output 1
Connector F
Connector G
Connector H
Connector E
41943