Rockwell Automation 1732E-XXXX Ethernet/IP 24Vdc 16 Input Modules - Manual (Page 11)

ArmorBlock 16-Point EtherNet/IP Module, Series A 11
Publication 1732E-IN002B-EN-E - February 2011
I/O Connectors
Refer to the pinout diagrams for the I/O connectors.
The 1732E-16CFGM12 and the 1732E-16FGM12W self-configuring
modules contain both input and output functionality.
•
If an I/O point is to be an output, dedicate that point as an output
with a wired load and energize it through a control program.
•
Energized outputs show an associated active input that can be used as
a feedback mechanism to make certain that the output is on.
(View into Connector)
Pin 1
Sensor Source Voltage
Pin 2 Input B
Pin 3 Return
Pin 4 Input A
Pin 5 PE
Micro-style 5-Pin Female Input Connector
41452
(View into Connector)
Pin 1
Sensor Source Voltage
Pin 2 Input or Output B
Pin 3 Return
Pin 4 Input or Output A
Pin 5 PE
Self-configuring Connector
41452
(View into Connector)
Pin 1
Not Used
Pin 2 Output B
Pin 3 Return
Pin 4 Output A
Pin 5 PE
Micro-style 5-Pin Female Output Connector
41452