Client computer requirements, Client tool software (cd), Setting up your controllogix environment – Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.1 Quick Start Guide User Manual
Page 9: Installing the factorytalk historian me module

S
ETTING
UP
Y
OUR
C
ONTROL
L
OGIX
E
NVIRONMENT
5
•
• •
ControlLogix 55xx (1756-Lxx) version 13 or higher
RSLogix 5000
ENBT/EN2T Module
Chassis
Client Computer Requirements
Power supply
Intel Penium III, 600MHz, 512MB RAM (minimum) or Intel
Celeron, 3 GHz or higher, (recommended), 1GB of RAM or
more
Mouse or compatible pointing device
Client Tool Software (CD)
FactoryTalk Services Platform CPR9 SR2
FactoryTalk Historian ME Management CRP9 SR2 (Admin
Console)
FactoryTalk Historian ME Rule Editor
FactoryTalk Historian ME RSLogix 5000 Module Profile
Setting up Your ControlLogix
Environment
Perform the following steps to set up your ControlLogix
environment before installing FactoryTalk Historian ME.
1.
Set up the ControlLogix chassis.
2.
Insert the ControlLogix controller(s) into the chassis.
3.
Power on the system.
4.
Configure the ControlLogix device(s).
Refer to your ControlLogix Chassis and ControlLogix Controller
documentation for more detailed information.
Installing the FactoryTalk Historian ME
Module
FactoryTalk Historian ME has two part numbers: