Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.1 Quick Start Guide - Manual (Page 15)

S ETTING T IME IN F ACTORY T ALK H ISTORIAN ME
11
•
• •
After logging in, it is highly recommended that you change the
password for the default “piadmin” user. See the FactoryTalk
Historian ME User’s Guide or online help for more information.
If you are using FactoryTalk Security in your network environment,
see the FactoryTalk Historian ME User’s Guide for information on
setting up FactoryTalk Security before continuing.
To prevent against unauthorized acess, click Logout before
closing the browser. If you just close the browser without clicking
Logout, then another user can access FactoryTalk Historian ME if
the cookie has not expired. The credential times out after twenty
minutes of inactivity. Do not have multiple users accessing FactoryTalk
Historian ME from the same client computer.
Setting Time in FactoryTalk Historian
ME
It is very important that all components are set to a synchronized
time. Depending on your environment, you may need to
synchronize the following components: