Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.1 Quick Start Guide - Manual (Page 30)

F ACTORY T ALK H ISTORIAN ME Q UICK S TART G UIDE
26
•
• •
2. Click on Data Transfer in the left-hand navigation bar. This
opens the Data Transfer page.
3. Under FactoryTalk Historian SE Parameters, enter the host
name or IP address of the
FactoryTalk Historian SE Server in
the Host Server Name data field.
4. Click [Test Connection] to confirm that the specified host
server can be accessed.
If the connection is successful, the following information is
returned:
Property Name Property Description
Current Time This is the current time of the FactoryTalk
Historian SE Server. It is a read-only
property.
Time Offset This is the time difference between the
FactoryTalk Historian SE Server and the
time setting on FactoryTalk Historian ME.
FTHSE Licensed
Points This is the total number of points that have
been granted based on the currently active
license for FactoryTalk Historian SE. See
Licensing in the FactoryTalk Historian ME
User’s Guide for more information.