Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.1 Quick Start Guide - Manual (Page 23)

C OLLECTING D ATA
19
•
• •
Review Results
After point creation is complete, the Review Results page opens.
The information here allows you to quickly see the success (or
failure) of the Create Points operation.
The Review Results page displays the following information:
Starting and Stopping Data Collection
You must have administrator privileges to start or stop data
collection in the FactoryTalk Historian ME module. To start the
Data Collection interface, perform the following steps:
Result Result Description
Number of Points
Created This is the number of points created based
on the points selected in the Create Points
operation. Only points that do not yet exist
are created.
Number of Points
Not Created This is the number of selected points that
were not created in the Create Points
operation. Either the points already exist in
the archive and do not need to be created,
or an error occurred in FactoryTalk
Historian ME. See the System Log for error
details. (Click on Advanced in the top
navigation bar. The System Log page is
displayed. Use default settings or enter
time parameters in the data fields and click
[Search].)
Total Number of
Points in Module This is the total number of points in the
FactoryTalk Historian ME Module,
including the newly created points.
Data Collection
Status This is the status of the Data Collection
process. If Data Collection is running, then
Running will appear next to [Stop Data
Collection]. If data collection is stopped,
then Stopped will appear next to [Start
Data Collection].