Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.1 Quick Start Guide - Manual (Page 32)

F ACTORY T ALK H ISTORIAN ME Q UICK S TART G UIDE
28
•
• •
Data Transfer Points
After you have set up the connection to FactoryTalk Historian SE,
you must specify which points you want to transfer.
The Data Transfer Points page allows you to search for points in
the FactoryTalk Historian ME database and assign them for transfer
to the selected FactoryTalk Historian SE Server.
To open the Data Transfer Points page, click on Configure
Historian in the top navigation bar, and then click on Data Transfer
Points in the left-hand navigation bar.
Selecting Points to Transfer
Follow these steps to select points to transfer:
1. Enter search criteria in the data fields using the following
information:
Successful Attempt
Rate This is the number of successful data
transfers from FactoryTalk Historian ME
to FactoryTalk Historian SE per hour.
Property Name Property Description
Point Name Enter a point name or use an asterisk (*) to
search data with all point names.
Point Source Select a point source from the drop-down
menu or use an asterisk (*) to search data
with all point sources.
Point Type Select a point type from the drop-down
menu or use an asterisk (*) to search data
with all point types.
Scan Rate Select a scan rate from the drop-down
menu or use an asterisk (*) to search data
with all scan rates.
Property Name Property Description