Rockwell Automation 1769-L32C_L35CR CompactLogix Controller Installation Instructions User Manual
Installation instructions
Installation Instructions
1769-L32C, 1769-L35CR CompactLogix
Controllers
Catalog Numbers 1769-L32C, 1769-L35CR
Topic
Page
Environment and Enclosure Information
Prevent Electrostatic Discharge
North American Hazardous Location Approval
Before You Begin
8
Install the Optional 1784-CF64 or 1784-CF128 Industrial CompactFlash Card
Connect a Programming Terminal to the Controller Via RS-232 Connections
Make ControlNet Connections to the Controller
Table of contents
Document Outline
- 1769-L32C, 1769-L35CR CompactLogix Controllers Installation Instructions
- Important User Information
- Environment and Enclosure Information
- Prevent Electrostatic Discharge
- North American Hazardous Location Approval
- Before You Begin
- Set the Node Address
- Connect the 1769-BA Battery
- Install the Optional 1784-CF64 or 1784-CF128 Industrial CompactFlash Card
- Assemble the System
- Mount the System
- Panel Mounting
- DIN-rail Mounting
- Product Dimensions
- Connect a Programming Terminal to the Controller Via RS-232 Connections
- Default Serial Configuration
- Using the Channel 0 Default Communication Push Button
- Make ControlNet Connections to the Controller
- Install the Appropriate Electronic Data Sheet (EDS) Files
- Load the Controller Firmware
- Use the ControlFlash Utility to Load Firmware
- Use the AutoFlash Utility to Load Firmware
- Use a CompactFlash Card to Load Firmware
- Select the Controller Operating Mode
- Verify Proper Controller Operation
- Interpret Status Indicators as Related to the ControlNet Network
- Network Channel Status Indicators
- Specifications
- Additional Resources
- Back Cover