Rockwell Automation 1771-SDN/B INSTL.INSTR.DEVICENET SEMINAR - Manual

Installation Instructions
Publication 1787Ć5.5 - December 1995
DeviceNet Seminar
Installation Instructions
Use these installation instructions to set up the lab for the
DeviceNet

seminar.
For information on See page
Meeting the Computer Requirements 1
What You Should Receive with the
DeviceNet Demo
2
Referring to Related Publications 2
What's in the Demo Boxes 3
Describing the Hardware 6
Installing the Software 7
Copying Files from the Seminar Disk 11
Connecting the Boxes 16
Checking the Diagnostics 17
Connecting the RSĆ232 Interface Module 18
Testing the Interface Module 20
Troubleshooting Your 1747ĆSDN
Scanner Module
22
The DeviceNet lab exercises require the following components.
•
Advanced Programming Software (APS)
•
DeviceNetManager

Software, Version 1.0
•
Two unoccupied comm serial ports
•
Microsoft

Windows

3.1 or later, Windows 95

,
or Windows NT

When to Use
These Instructions
Meeting the
Computer Requirements