Rockwell Automation 1769-IF4FXOF2F Compact Combination Fast Analog I/O Module - Manual (Page 11)

Compact Combination Fast Analog I/O Module 11
Publication 1769-IN081A-EN-P - February 2007
Mount Module to a DIN Rail
The module can be mounted using these DIN rails:
•
35 x 7.5 mm (EN 50 022 - 35 x 7.5)
•
35 x 15 mm (EN 50 022 - 35 x 15)
To mount the module on a DIN rail follow these steps.
1. Close the DIN rail latches.
2. Press the DIN rail mounting area of the module against the DIN rail.
The latches will momentarily open and lock into place.
Replacement Parts
The 1769-IF4FXOF2F module has the following replacement parts:
•
Terminal block, catalog no. 1769-RTBN18 (1 per kit)
•
Door, catalog no. 1769-RD (2 per kit)
Field Wiring Connections
This section includes information on the following topics:
•
Module grounding
•
System wiring guidelines
•
Module wiring
•
Differential inputs wiring
•
Single-ended input sensor/transmitter types wiring
•
Mixed-input transmitter type wiring
•
Analog outputs wiring
•
Terminal labeling
•
Finger-safe terminal block wiring and removal
•
Wire size and terminal screw torque
•
Module configuration
Ground the Module
This product is intended to be mounted to a well-grounded mounting surface such
as a metal panel. Additional grounding connections from the module’s mounting
tabs or DIN rail, if used, are not required unless the mounting surface cannot be
grounded. Refer to Industrial Automation Wiring and Grounding Guidelines,
Allen-Bradley publication 1770-4.1, for additional information.