A- specifications, Appendix a, Specifications – Rockwell Automation 1784-PCIDS DeviceNet PCI Communication Interface Card User Manual
Page 59: Appendix

Publication 1784-IN004E-EN-P - April 2005
Appendix
A
Specifications
PCI local bus
compliant to PCI Rev. 2.2.
The 1784-PCIDS card is compatible with 5V and 3.3V PCI slots,
32-bit and 64-bit PCI slots, and PCI-X slots.
Attention: The 1784-PCIDS is not compatible with PCI Express and
should not be inserted into a PCI Express slot.
mechanical form factor
Universal PCI 32-bit short card
4.2 in. (10.7 cm) H x 4.72 in. (12 cm) L
host PC requirements
One of the following operating systems:
• Microsoft Windows XP with Service Pack 1 or higher
• Microsoft Windows 2000 with Service Pack 4 or higher
Microsoft Windows NT 4.0 is not supported.
capacity
2048 bytes of input image table
2048 bytes of output image table
software compatibility
Rockwell Software RSLinx 2.42.00 or later
Rockwell Software RSNetWorx for DeviceNet 2.11.51 or later
operational temperature
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):
0 to 55
°C (32 to 131 °F)
The operating parameters describe the environment within the PCI
slot. Refer to the documentation for your computer for
environmental requirements. This card should not exceed those
specifications.
storage temperature
IEC 60068-2-1 (Test Ab, Un-packaged Non-operating Cold),
IEC 60068-2-2 (Test Bb, Un-packaged Non-operating Dry Heat),
IEC 60068-2-14 (Test Na, Un-packaged Non-operating Thermal
Shock):
-40 to 85
°C (-40 to 185 °F)
relative humidity
IEC 60068-2-30 (Test Db, Un-packaged Non-operating Damp Heat):
5 to 95% non-condensing
vibration
IEC 60068-2-6 (Test Fc, Operating):
2g @ 10-500Hz
operating shock
IEC 60068-2-27 (Test Ea, Unpackaged Shock):
30g