Rockwell Automation 1788-EN2DN Ethernet-to-DeviceNet Linking Device - Manual (Page 52)

52 Ethernet-to-DeviceNet Linking Device
Rockwell Automation Publication 1788-IN055C-EN-P - September 2011
Wire size DeviceNet connections:
See appropriate system-level installation
manual
Ethernet network connections:
RJ45 connector according to IEC 60603-7, 2
or 4 pair Category 5e minimum cable
according to TIA 568-B.1 or Category 5 cable
according to ISO/IEC 24702
DC Power connections:
0.2… 3.3 mm
2
(24…12 AWG) solid or
stranded copper wire rated at 75 °C (167 °F),
or greater, 1.2 mm (3/64 in.) insulation max
Wiring category
(1)
2 - on power ports
2 - on communication ports
North American temp code T4
IEC temp code T4
(1) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and
Grounding Guidelines, publication
1770-4.1 .
Environmental Specifications - 1788-EN2DN
Attribute 1788-EN2DN
Temperature, operating
• IEC 60068-2-1 (Test Ad, Operating Cold),
• IEC 60068-2-2 (Test Bd, Operating Dry Heat),
• IEC 60068-2-14 (Test Nb, Operating Thermal Shock) 0…60 °C (32…140 °F)
Temperature, surrounding air, max 60 °C (140 °F)
Temperature, nonoperating
• IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating
Cold),
• IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry
Heat),
• IEC 60068-2-14 (Test Na, Unpackaged Nonoperating
Thermal Shock)
-40…85 °C (-40…185 °F)
Technical Specifications - 1788-EN2DN
Attribute 1788-EN2DN