Rockwell Automation 1788-EN2DN Ethernet-to-DeviceNet Linking Device - Manual (Page 43)

Ethernet-to-DeviceNet Linking Device 43
Rockwell Automation Publication 1788-IN055C-EN-P - September 2011
Module Status Indicator
Ethernet Link Status Indicator
The Ethernet Link status indicator indicates that the module is connected to an
Ethernet network. The status indicator displays green if the link is active. The
status indicator will flash when Ethernet packets are received and transmitted.
Ethernet Network Status Indicators
DeviceNet Module Status Indicator States
Indicator Status Description
Flashing green Standby or not
configured The module has not been configured and is
currently using default values.
This status indicator state is also used to indicate
that the module is in a standby state. This could
occur during initialization or DeviceNet autobaud.
Solid green Normal Normal operation.
Solid red Unrecoverable major
fault A fault the requires user intervention has been
detected. Correct the problem and reset the linking
device.
Flashing red Recoverable minor
fault A fault that can be corrected and does not require a
linking device reset has been detected.
Ethernet Network Status Indicator States
Indicator Status Description
Off No IP address The module has no IP address assigned.
Solid green Network OK and
communicating There is at least one EtherNet/IP connection.
Flashing green Network OK There are no active connections.