Rockwell Automation 1788-CNFR ControlNet Daughtercard Installation Instructions - Manual (Page 7)

ControlNet Daughtercard 7
Publication 1788-IN005A-EN-P - March 2001
Figure 1 -- Set the Node Address
Install the Card
Due to wide variation in available host devices, we cannot provide specific
installation instructions in this document. For instructions on how to install the
daughtercard in a host device, refer to the user manual for the particular host
device.
IMPORTANT
Do not install or remove the daughtercard while the host is
under power.
WARNING
ÿ
Inserting or removing the module while host power is on may
cause an electrical arc. This could cause an explosion in
hazardous location installations. Be sure that power is removed
or the area is nonhazardous before proceeding.
I/O
Status
LED
NAP
Node Address
Switches
Network Status Indicators (A and B)
Network Status Indicators (A and B)
channel A connector
channel A connector
channel B connector
1788-CNFR
Module
Status LED
31155
1788-CNF
10’s 0’s