Rockwell Automation 1788-CNFR ControlNet Daughtercard Installation Instructions - Manual (Page 18)

18 ControlNet Daughtercard
Publication 1788-IN005A-EN-P - March 2001
Specifications
Characteristic Value
Power Requirements
1
1
To comply with UL and CSA restrictions, this equipment must be powered from a source compliant with the
following: Class 2 or Limited Voltage/Current, as defined in UL 508 Seventeenth Edition Section 32; and
Separated Extra-Low Voltage (SELV), as defined in CSA C22.2 no. 1010, Annex H.
1788-CNF: 5V dc @ 440 mA (maximum)
1788-CNFR: 5V dc @ 450 mA (maximum)
Conductor Category 2
2
2 Refer to publication 1770-4.1, Industrial Automation Wiring and Grounding Guidelines.
Environmental Specifications
This industrial control equipment is intended to operate in a Pollution Degree
2 environment, in overvoltage category II applications, (as defined in IEC
publication 664A) at altitudes up to 2000 meters without derating. Also refer
to the user manual for your host device.
Temperature
This product is suitable for application in equipment that is rated 0 to 60 o C
(32 to 140
o
F) maximum. It is acceptable for the ambient slot temperature
immediately surrounding this product to reach 85 o C (185 o F) maximum.
Weight 0.1 kg (0.2 lb.)
Agency Certifications
When product it marked:
N223
UL Recognized Component Industrial Control Equipment
Marked for all applicable directives
Marked for all applicable acts
Certified component Process Control Equipment
Certified component Class I, Division 2, Group A, B, C, D
ControlNet International
Conformance Tested