Rockwell Automation 1738-8CFGM23 ArmorPoint Module with Configurable 24V DC Points - Manual (Page 6)

6 ArmorPoint I/O Modules with 8 Configurable 24V DC Points
Publication 1738-IN026B-EN-E - February 2010
Install the mounting as follows:
1. Lay out the required points as shown above in the drilling dimension
drawing.
2. Drill the necessary holes for M4 (#8) machine or self-tapping screws.
3. Mount the base using M4 (#8) screws.
4. Ground the system using the ground lug connection.
The ground lug connection is also a mounting hole.
Mounting Base
Install the Digital Module
Follow the instructions to install the analog input module.
1. Using a bladed screwdriver, rotate the keyswitch on the mounting base
clockwise until the number 1 aligns with the notch in the base.
Ground lug connection
Latching mechanism
Keyswitch
Set to position 1,
for the 1738 24V DC
input modules
43675