Rockwell Automation 1500 Modular Protection System Conversion Kit (Bulletin 1406 to Bulletin 825 Plus) - Manual (Page 5)

Chapter
1
1500-IN058D-EN-E – June 2013
Introduction
Overview
This manual describes the installation of the Bulletin 825 Plus Conversion
Kit within a typical medium voltage (MV) controller. Simple troubleshooting
is also included.
Although this manual outlines the implementation within a medium
voltage controller, the basic philosophy also applies for installation within
any voltage controller where a Bulletin 1406 has been used. To use this
manual effectively, you must be familiar with electrical procedures and
terminology.
For setup, programming, and operation information on
the Bulletin 825-P Modular Protection System for
Motors, refer to Publication 825-UM004_-EN-P.
Rockwell Automation reserves the right to adapt the
products described in this manual, at any time, to suit the
latest technical developments. Accordingly, attached
information is not an object of the contract and thus may
change without notification.
Prerequisite for proper operation is correct transport, proper and competent
storage and installation, as well as careful operation and maintenance.
1. The power supply must be switched off prior to any intervention in the
electrical or mechanical part of the equipment.
2. In accordance with the applicable rules, work on electrical equipment
or means of production may only be carried out by competent
electricians or suitably trained persons guided and supervised by a
competent electrician.
3. The electrical equipment of a machine / plant must be inspected / tested.
Deficiencies such as loose connections or scorched cables must be
eliminated immediately.
4. The described control and protection system, 825 Plus, provides
starting and stopping functions for a motor.
In case of electrical or mechanical faults, the machine
must be switched off and protected immediately. The
elimination of disturbances must be organized without
delay. Failure to do so may result in personal injury
and/or damage to the equipment.
A T T E N T I O N A T T E N T I O N
I M P O R T A N T I M P O R T A N T
A T T E N T I O N A T T E N T I O N