beautypg.com

System configuration, Figure 34 - system configuration, Model information – Rockwell Automation 1608M MegaDySC User Manual, 800 Amp - 208V User Manual

Page 43: Figure 35 - model information, Table 9 - model information, Run system tests diagnostics mode

background image

Rockwell Automation Publication 1608M-UM003A-EN-P - December 2013

43

Display Screen

Chapter 6

System Configuration

Press the “CONFIG” button at the bottom of the “HOME” screen to enter the
“System Configuration” screen (See

Figure 34

). The “SET SYSTEM CLOCK”

and “CALIBRATE TOUCH SENSOR” functions are described at the start of
this chapter.

Figure 34 - System Configuration

Model Information

Touch “VIEW MODEL INFORMATION” to go to the “Model Information”
screen. (See

Figure 35

).

Figure 35 - Model Information

Table 9 - Model Information

Description

Function

Model Details

Model Number: System Model number
Serial Number: System serial number
System Rating: System voltage and current ratings

Unit Details

Node: The location index for the details listed to the right
Firm: The firmware version for the location indexed.
Type: Unique code specifying firmware part number for the location indexed.
Serial: The serial number for the location indexed
Volts:
The rated voltage for the locations
Amps: The rated current for the location indexed