Rockwell Automation 1606-XLDC92D Power Supply Reference Manual - Manual (Page 2)

All parameters are specified at 24V, 3.8A, 24Vdc input voltage, 25°C ambient and after a 5 minutes run-in time, unless noted otherwise.
2 Rockwell Automation Publication 1606-RM023A-EN-P — January 2014
Bulletin 1606 Switched Mode Power Supplies
DC/DC Converter
24V DC-Input
Isolated 24Vdc Output
NEC Class 2 Output
Efficiency up to 90.5%
Width only 32mm
Full Power Between -25°C and +60°C
Soft-start Function Included
Minimal Inrush Current Surge
Reverse Input Polarity Protection
3 Year Warranty
Description
The 1606-XLDC92D DC/DC converter is installable on a
DIN rail and provides a 92-120W output power range
in a very compact housing.
This DC/DC converter is allowed to run with a battery
or similar source. It may also be used to refresh and
stabilize the 24Vdc on the end of long cable runs.
This unit includes all the essential basic functions,
Specification Quick Reference
Output voltage DC 24V
Adjustment range not adjustable
Output current 3.8A NEC Class 2
Output power 92W
Output ripple < 50mVpp 20Hz to 20MHz
Input voltage DC 24V
Input voltage range 14.4 to 32.4Vdc full specified
Input current typ. 4.25A at 24Vdc input
Input inrush current typ. 1.2A peak
Efficiency 90.5% at 24Vdc input
Losses 9.7W at 24Vdc input
Temperature range -25°C to +70°C operational
Derating 0W/°C +60 to +70°C
Hold-up time
typ. 7ms at 24Vdc input
Dimensions 32x124x102mm WxHxD
Catalog Numbers
DC/DC Converter 1606-XLDC92D Standard unit
Accessory 1606-XLB Wall mount bracket
Certifications
Ind. Cont. Eq.
UL 508, NEC Class 2
Class I Div 2
UL 60950-1
UL 61010-1
Class I Div 2
EMC, LVD
with a powerboost of 20% incorporated. This extra
power can even be used continuously, up to +45°C.
II 3G Ex nA IIC T4 Gc
ATEX IECEx
C-Tick Marine RINA
Marine Gost R