Rockwell Automation 1326-xxxx Cable Bulkhead Connector - Manual (Page 8)

Publication 1326-IN025B-EN-P - May 2007
8 Bulkhead Connections for Series B 1326 Cables
Installing Push-pull and
Bulkhead Connectors The 1326-xxxT-D-xxx connector has male pins at one end and female
contacts on the other end.
Guidelines for Connecting Cables with Push-pull and Bulkhead
Connectors
These guidelines apply to push-pull and bulkhead cable connections.
• A push-pull connector can connect only to a bulkhead connector or a
460V-1326Ax motor.
• A bulkhead connector can connect only to a push-pull connector.
• One connector must have male pins and the connector it mates with
must have female contacts.
• Cables designated with the L option can connect to cables or motors
without this option, but the resulting connection does not provide the L
option.
• The length of a cable run cannot exceed 90 m (295 ft.).
WARNING
All series B cable connectors are treated with a black,
highly-conductive, cobalt coating. Do not scrape this coating.
ALLEN-BRADLEY ALLEN-BRADLEY
Push-pull Connector Bulkhead Connector