Rockwell Automation 1326-xxxx Cable Bulkhead Connector - Manual (Page 10)

Publication 1326-IN025B-EN-P - May 2007
10 Bulkhead Connections for Series B 1326 Cables
Installing a Bulkhead Connector through a Cabinet Wall
The recommended connection method will result in a connector seal at the
cabinet wall equivalent to an IP65 rating.
Follow these steps to prepare a cabinet wall for mounting the bulkhead
connector.
IMPORTANT
You do not need to attach the bulkhead cables to a cabinet
wall, but you do need to follow the information in Guidelines for
Connecting Cables with Push-pull and Bulkhead Connectors on
page 8.
Diameter of
mounting holes
Distance
between centers
of mounting holes
Diameter of
connector opening
Wall surface
4.623 mm (0.182 in)
Maximum width
of cabinet wall
AB
Bulkhead
connector
diameter Wall's opening
for diameter
of connector