Rockwell Automation 1606-XLSRED80 Power Supply Reference Manual - Manual (Page 12)

All parameters are specified at 24V, 80A output current, 25ªC ambient and after a 5 minutes run-in time, unless noted otherwise.
12 Rockwell Automation Publication 1606-RM011A-EN-P — February 2014
Bulletin 1606 Switched Mode Power Supplies
Product certification information (including Certificates and Declarations of Conformity) can be found at www.ab.com/certifications .
14. Certifications
EC Declaration of
Conformity
Complies with
- CE EMC directive,
- CE Low-voltage directive
UL 508 LISTED E56639 for use in the U.S.A. (UL 508) and Canada
(C22.2 No. 14-95). Industrial Control Equipment
UL 60950-1 RECOGNIZED E168663 for use in the U.S.A. (UL 60950-1)
and Canada (C22.2 No. 60950)
Information Technology Equipment, Level 3
GOST R GOST R certification is applicable for products intended for sale an
use within Russia. See below for lik to Certificate.
C-TICK C-tick compliance is for products intended for sale and use within
the Australian market. See below for the link to the C-tick
Declarations of Conformity.
Marine GL GL (Germanischer Lloyd) classified for marine and offshore
applications. Environmental category: C, EMC2. See below for link
to the certificate.
Marine Rina RINA (Registro Italiano Navale) certified. See below for the link to
the certificate.
The CE mark indicates conformance with the
- ATEX directive 94/9/EC (Equipment and protection systems
intended for use in potentially explosive atmospheres)
CSA Certified under File Number 240020; CERTIFIED for use
in the U.S.A. (ISA 12.12.01) and Canada (C22.2 No. 213)
Hazardous Location Class I Div. 2, Groups A, B, C, D CSA 22.2 No 213,
ISA 12.12.01
ATEX
Suitable for use in Class 1 Zone 2 Groups IIa, IIb and IIc
locations. Number of ATEX Certificate: EPS 11 ATEX 1 312 X
The redundancy module must be built-in in an IP54 enclosure.