Rockwell Automation 1492-PLTKIT Plotter Kit - User Manual - Manual (Page 51)

Operation of Plotter 3-3
Cursor and Pen Up/Down Buttons
The “Cursor” buttons are used to move the writing arm manually in all
directions.
The “Pen Up/Down” buttons lowers and raises the plotter pen. To raise or
lower the pen, the system must be in the stop mode.
Open the pen station before using the plotter. Insert the plotter pen into the
pen station and then close the pen station
IMPORTANT
These key functions are not used for normal operation.
They are intended solely for service functions.