Rockwell Automation 1492-PLTKIT Plotter Kit - User Manual - Manual (Page 12)

1-6 Marking System Description
➊ Catalog numbers in bold indicate the preferred marker.
➋ Catalog numbers in italics indicate the corner markers of a spring-clamp terminal block.
➌ Many bulletin number 1492-M markers have identical mounting feet, resulting in the ability to use
many different types of markers in a given product.
ClearTools Software ClearTools software is a Microsoft Windows-based program that creates files
containing marker card layouts. These files contain all the information to print
multiple base plates full of marker cards. See Table 1.B lists the available
marking system accessories.
1492-MS8X12 1492-H4, 1492-H5, 1492-H6, 1492-H7, 1492-RFB4*, 1492-RAFB4*,
1492-W10, 1492-WFB4*, 700-HA, 1492-W165, 1492-WG10,
1492-WG165
1492-MS8X17 700-HN204, 700-HN205
1492-MS9X20 1667 PanelConnect
1492-MS10X17 100-C, 100-D, 700-CF, 140, 193-E1, 193-E3, 1492-REC*
1492-MW9X24
Wire/cable from 6 AWG (from 16.0 mm
2
)
1492-MW10X23
Wire/cable from 6 AWG (from 16.0 mm
2
)
1492-MW14X23
Wire/cable from 6 AWG (from 16.0 mm
2
)
1492-MW11X60
Wire/cable from 6 AWG (from 16.0 mm
2
)
1492-MW5-21
#12…10 AWG (4.0…6.0 mm
2
) wire
1492-MW6-21
#10…8 AWG (6.0…10.0 mm
2
) wire
1492-MW7-21
#8…6 AWG (10.0…16.0 mm
2
) wire
1492-MWC1-21
#20…18 AWG (0.5…1.0 mm
2
) wire
1492-MWC3-21
#18…14 AWG (0.75…2.5 mm
2
) wire
1492-MWC4-21
#12 AWG (2.5…4.0 mm
2
) wire
1492-MWC1-12
#20...18 AWG (0.5…1.0 mm
2
) wire
1492-MWC3-12
#18…14 AWG (0.75…2.5 mm
2
) wire
1492-MWC4-12
#12 AWG (2.5…4.0 mm
2
) wire
1492-SM5X10 1492-JD3P, 1492-JD3PTP, 1492-JD3PSS, 1492-JD3PSSTP,
1492-JDG3P, 1492-JDG3PTP, 1492-JDG3PSS, 1492-JDG3PSSTP
1492-M5X30 1492-GMC
1492-MD6X9 1732 I/O
Table 1.A
Allen–Bradley Markers for Allen-Bradley Products
Marker/Label
Catalog No. Use With These Allen-Bradley Terminal Blocks and Other
Products