Rockwell Automation 1502 Electrically-Held to Mechanically Latched Contactor - Retrofit Instructions - Manual (Page 8)

4 Electrically Held to Mechanical Latch Contactor • Retrofit Instructions
1502-IN001 %-EN-P –-XQH
Figure 5 – Contactor (Front/bottom View)
Showing Mounting Bolts for Latch Mechanism
A T T E N T I O N A T T E N T I O N The return springs exert a significant force on the
armature plate. To avoid injury, do not place fingers
between the armature plate and the stop bracket at
any time.
5. Position the clamp plate under the base of the contactor so that the
three holes in the latch mechanism align with the slots in the
contactor molding and the holes in the clamp plate. Hand tighten
the three mounting bolts to hold the mechanism in position.