Rockwell Automation 440L GuardShield Type 4 and Remote Teach User Manual - Manual (Page 18)

GuardShield™ Safety Light Curtain User Manual
16
R
Original instructions
Connections [mm (in.)]
Cables/Connectors
The GuardShield transmitter connector is a four-pin DC micro
connector offered in cable lengths from 2 to 30 meters. The
GuardShield receiver connector is an 8-pin DC micro connector
offered in cable lengths of 2 to 30 meters.
GuardShield Standard and GuardShield with
ArmorBlock Guard I/O Connectivity
Note: The transmitter is not expected to be connected to the
ArmorBlock Guard I/O module.
Standard GuardShield Receiver Connector
GuardShield Receiver Connector for ArmorBlock Guard I/O Connectivity
Interconnecting Patchcords for Cascading GuardShield
Example of Patchcord for connecting cascading GuardShield
Transmitter Connection
Face View of
Female DC Micro Color Pin No.
Signal
Transmitter
Brown 1 +24V DC
White 2 No Connection
Blue 3 0V DC
Black 4 Machine Test Signal
Receiver Connection
Face View of
Female DC Micro Color Pin No.
Signal
Receiver
White 1 Auxiliary Output
Brown 2 +24V DC
Green 3 Ground
Yellow 4 EDM
Grey 5 OSSD 1
Pink 6 OSSD 2
Blue 7 0V DC
Red 8 Start/Restart
Top View Color Pin No.
Signal
Receiver
Brown 1 +24V
White 2 OSSD 2
Blue 3 0V
Black 4 OSSD 1
Grey 5 NC
Not available for GuardShield with ArmorBlock
Guard I/O connectivity.
IMPORTANT
42 (1.7)
15 (0.57)
1 4
3 2
2
1
5 8
7 6
4
3
Cat. No. Description
Transmitter Patchcord
889D-F4HLDM-0M3 4-pin M12 patchcord, 12 inches
889D-F4HLDM-1 4-pin M12 patchcord, 1 meter
889D-F4HLDM-2 4-pin M12 patchcord, 2 meters
Receiver Patchcords
889D-F8ABDM-0M3 8-pin M12 patchcord, 12 inches
889D-F8ABDM-1 8-pin M12 patchcord, 1 meter
889D-F8ABDM-2 8-pin M12 patchcord, 2 meters
Shorting Plug (Required for cascading GuardShield if last pair in cascade sytem or standalone pair.)
Receiver
898D-81CU-DM Termination plug 8-pin M12 quick-disconnect