Original instructions, Ec declaration of conformity – Rockwell Automation 445L GuardShield Safe 4 and Safe 4 PAC Safety Light Curtains User Manual User Manual
Page 36

GuardShield™ Safe 4 Safety Light Curtain User Manual
34
R
Original instructions
EC DOC
Document Control Number: SEN-0392-C-EN
1 / 3
EC Declaration of Conformity
The undersigned, representing the manufacturer
and the authorised representative established within the Community
Rockwell Automation, Inc.
1201 South Second Street
Milwaukee, WI 53204
USA
Rockwell Automation BV
Rivium 1e Straat, 23
2909 LE Capelle aan den IJssel
Netherlands
Herewith declare that the Products:
Safe4 Safety Light Curtains
Product identification (brand and
catalogue number/part number):
Allen-Bradley / GuardShield 445L Series
(reference the attached list of catalogue numbers)
Product Safety Function
Safe4 safety light curtains are Type 4 active opto-electronic protective devices
(AOPD) with resolutions of 14mm and 30mm/PAC. They are cascadeable, and
can be used in applications up to Safety Category 4 (EN 954-1)/ SIL3/SIL CL3
(EN 61508 / EN 62061) and PL e (EN ISO 13849-1).
are in conformity with the essential requirements of the following EC Directive(s) when installed in accordance with the installation
instructions contained in the product documentation:
2006/42/EC
Machinery Directive
2004/108/EC
EMC Directive
and that the standards and/or technical specifications referenced below have been applied:
EN 61496-1:2004 + A1:2008
Safety of machinery – Electro-sensitive protective equipment – Part 1: General
requirements and tests
IEC 61496-2:2006
Safety of machinery – Electro-sensitive protective equipment – Part 2: Particular
requirements for equipment using active opto-electronic protective devices (AOPD’s)
EN ISO 13849-1:2008
Safety of machinery – Safety-related parts of control systems – Part 1: General principles
for design
EN 61508 Parts 1-7:1998-2000
Functional safety of electrical/electronic/programmable electronic safety-related systems
EN 954-1:1997
Safety of machinery – Safety related parts of control systems – Part 1: General principles
for design
EN 50178:1997
Electronic equipment for use in power installations
EN 62061:2005
Safety of machinery – Functional safety of safety-related electrical, electronic and
programmable electronic control systems
EN 60204-1:2006
Safety of machinery – Electrical equipment of machines – General requirements
EN 61000-6-4:2007
Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard
for industrial environments (Class A)
EN 61000-6-2:2005
Electromagnetic Compatibility (EMC) – Part 6-2: Generic standards – Immunity for
industrial environments
Conformance of a type sample belonging to the above mentioned product family with the regulations from the EC Machinery Directive
has been certified by:
TÜV Rheinland Industrie Service GmbH
Alboinstrasse 56
12103 Berlin, Germany
EC Type Examination
Registration No: 01/205/0551/09
Report No: 968/M203.02/09
Manufacturer:
Authorised Representative in the Community:
Signature
Signature
Name:
Daniel L. Nachtigall
Name:
Viktor Schiffer
Position:
Supv – Product Certification Engineering
Position:
Engineering Manager
Date:
25-Mar-2011
Date:
28-Mar-2011